Skip to content

Detect assembly errors before they become costly.

Vision AI inspects every assembly step using a camera at the workstation. Missing parts, mixed-up components, and incorrectly routed cables are detected before the next step begins.

Camera-manufacturer-neutralon-premises deployment possibleaudit-proof documentation
VISION AI · PRODUCT VIDEO
VISION AI Explained in 2 Minutes 2:41

What is Vision AI?

Vision AI is camera-based inspection software in CSP’s Manufacturing OS. It compares each assembly step with pre-trained reference images, reports deviations in real time at the station, and saves an inspection image for each step as proof. The team trains the system on new variants themselves, without programming and without an external service provider. It can be used independently as an inspection station on the production line or as an integrated part of the PG operator assistance system.

THE COST TRAP

Assembly errors are often not noticed until it’s too late

In manual assembly, every step determines the quality. Without continuous monitoring, deviations go unnoticed and only become apparent during the final inspection or at the customer’s site.

01

Exam only at the end

Traditional exams usually take place only after the final station. The individual work steps and their correct sequence remain unobserved.

02

Errors go undetected

Missing components or incorrectly routed cables are easily overlooked without a visual inspection and can later affect product quality.

03

Time-consuming documentation

Manually documenting every step takes time and is prone to errors. It is therefore hardly economically feasible to maintain complete documentation.

THE SOLUTION

Every step is checked before the next one begins

Vision AI uses a camera to verify that each step has been performed correctly. This prevents rework, and verification is generated automatically.

Errors remain at the station

Deviations are marked in the camera image before the next step begins.

Verification without additional effort

Each step is documented with a test image. Audit requests are addressed within minutes.

New Variants in Hours

Training using reference images instead of programming or an external service provider.

No siloed solution

Inspection results are fed into the Manufacturing OS data lake and are available for quality analysis.

USE CASE · POSITION DETECTION

Where is the part located, and is it positioned correctly?

Position detection not only checks whether a component is present, but also where it is located. Vision AI detects the position, orientation, and distance in the camera image and reports any deviations before the next step begins.

vision-ai

 

 

 

 

 

 

 

 

Visual Step-by-Step Inspection

Completeness per step, anomalies, OK/NOK with overlay

Documentation & Verification

Visual Documentation, Traceability, Real-Time Quality Data

Flexible Hardware

Tablet or network camera, regardless of manufacturer

Training with Reference Images

Training without programming; new variants can be added at any time

HOW TO DO IT

Take reference images, have them checked, and you're done

The process from the initial scan to the ongoing review usually takes just a few hours per station.

01

Take reference photos

Take one photo of the correct condition for each step, right at the workstation.

02

Define Evaluation Criteria

Define what must be present, correctly positioned, or clearly distinguishable.

03

Check in real time

The camera evaluates each step and reports "OK" or "NOK" with a mark on the image.

04

Save proof

The result and test image are automatically added to the traceability system.

See what Vision AI detects on your own component in 30 minutes

We’ll show you how to use Vision AI to detect assembly errors right at the workstation, document every step, and reduce the workload on your quality assurance team.